Symbol/Motorola MC9090 Will Not Scan
Symbol/Motorola MC9090 Will Not Scan
Symbol/Motorola MC9090 will not scan? If so, it may not necessarily be caused by hardware failure. In fact, it can be something as simple as not having the correct program loaded on the device. Check the device for a program called ‘Datawedge’. If Datawedge cannot be found, you can simply download it. You can find and download the program here. Once you have the program downloaded, install it on your PC. Place the device in the cradle and sync to your PC. Once connected, (on the PC) go to Start>Appications>Motorola Datawedge and select install datawedge. On your device tap install to complete. If that does not solve the issue, then it may need some further evaluation. Please contact us for more details.
Do you have more questions on the article?: Symbol MC9090 Won’t Scan
If your Symbol / Motorola MC9090 / MC9190 is having problems, please fill out this form to have us contact you, or call 888.317.3440 to arrange a free consultation.
See more on Barcode Repair and how to buy used barcode products.
Symbol/Motorola MC9090 Will Not Scan
Our repair center is located in Plano, Texas which makes it easy for customer to send in their Zebra barcode printers for repair. We also very proudly do onsite repairs in all of the North Texas cities below. Please call us to see if we service your area if it is not on this list.
Addison, Allen, Azle, Balch Springs, Bedford, Benbrook, Burleson, Cedar Hill, Cleburne, Colleyville, Coppell, Corinth, Crowley, DeSoto, Duncanville, Ennis, Euless, Farmers Branch, Flower Mound, Forest Hill, Forney, Glenn Heights, Grapevine, Greenvill, Halton City, Highland Village, Hurst, Keller, Lancaster, Little Elm, Mansfield, Midlothian, Mineral Wells, Murphy, North Richland Hills, Prosper, Rockwall, Rowlett, Saginaw, Sachse, Seagoville, Southlake, Terrell, The Colony, University Park, Watauga, Waxahachie, Weatherford, White Settlement, Wylie, Texas
